ResMed Quattro FX (headgear only)

Try ResMed Quattro™ FX (headgear only) size standard. It includes the headgear for the ResMed Quattro™ FX full face CPAP mask. Light and unobtrusive, the full face mask is a reliable, effective option for non-invasive ventilation (NIV) that's suitable for the hospital and home. This purchase does not include the Quattro FX full face cushion or frame system. Full face mask, mouth and nose coverage, silicone cushion
A predecessor to today's popular AirFit™ series
Prescription required for complete mask system

See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.

See directions below. Daily/After each use:
Disassemble the mask components according to the disassembly instructions
Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap
To optimize the mask seal, facial oils should be removed from the cushion after use
Use a soft bristle brush to clean the vent
Inspect each component and if required, repeat washing until visually clean
Rinse all components well with drinking quality water and allow to air dry out of direct sunlight
When all components are dry, reassemble according to the reassembly instructions
Weekly:
Handwash the headgear. It may be washed without being disassembled
Handwash the soft sleeves
Do not use aromatic-based solutions or scented oils (eg, eucalyptus or essential oils), bleach, alcohol or products that smell strongly (e.g., citrus) to clean any of the mask components
Residual vapours from these solutions can be inhaled if not rinsed thoroughly. They may also damage the mask, causing cracks.

ResMed Quattro™ FX (headgear only) - Intended use The Quattro FX/Quattro FX for Her channels airflow noninvasively to a patient from a continuous positive airway pressure (CPAP) or bilevel device. Explanation: CPAP and bilevel devices are intended to be used with special masks (or connectors) which have vent holes to allow continuous flow of air out of the mask. When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask vent holes. However, when the device is not operating, insufficient fresh air will be provided through the mask, and the exhaled air may be rebreathed.Rebreathing of exhaled air for longer than several minutes can, in some circumstances, lead to suffocation. The Quattro FX/Quattro FX for Her is to be used by adult patients ( 66 lb/30 kg) for whom positive airway pressure has been prescribed. It is intended for single-patient re-use in the home environment and multipatient re-use in the hospital/institutional environment. The mask must be used under qualified supervision for users who are unable to remove the mask by themselves. The mask may not be suitable for those predisposed to aspiration
The elbow and valve assembly have specific safety functions. The mask should not be worn if the valve is damaged as it will not be able to perform its safety function. The valve should be replaced if it is damaged, distorted or torn
The vent holes must be kept clear
This mask should only be used with CPAP or bilevel devices recommended by a physician or respiratory therapist
The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air
Follow all precautions when using supplemental oxygen. Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does not accumulate within the device enclosure and create a risk of fire
Oxygen supports combustion. Oxygen must not be used while smoking or in the presence of an open flame. Only use oxygen in well ventilated rooms
Remove all packaging before using the mask
Ensure the soft sleeves are fitted at all times during use
If any visible deterioration of a system component is apparent (cracking, crazing, tears etc), the component should be discarded and replaced
Avoid connecting flexible PVC products (eg, PVC tubing) directly to any part of the mask. Flexible PVC contains elements that can be detrimental to the materials of the mask, and may cause the components to crack or break