ResMed Quattro FX (mask cushion only)

ResMed Quattro™ FX (mask cushion only) Includes the full face cushion for the ResMed Quattro™ FX full face CPAP mask. This purchase does not include the Quattro FX headgear or mask frame system. Full face mask, mouth and nose coverage, silicone cushion
A predecessor to today's popular AirFit™ series
Prescription required for complete mask system

See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.

ResMed Quattro™ FX cushion Replacing your equipment The Centers for Medicare and Medicaid Services (CMS) coverage guidelines allow for regular replacement of masks and accessory parts, like air filters or tubing. Replacing your mask and accessories as appropriate helps ensure you are receiving the best, most comfortable therapy possible. Daily/After each use: Disassemble the mask components according to the disassembly instructions
Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap
To optimize the mask seal, facial oils should be removed from the cushion after use
Use a soft bristle brush to clean the vent
Inspect each component and if required, repeat washing until visually clean
Rinse all components well with drinking quality water and allow to air dry out of direct sunlight
When all components are dry, reassemble according to the reassembly instructions
Weekly:
Handwash the headgear

ResMed Quattro™ FX cushion Intended use The Quattro FX/Quattro FX for Her channels airflow noninvasively to a patient from a continuous positive airway pressure (CPAP) or bilevel device. To be used by adult patients ( 66 lb/30 kg) for whom positive airway pressure has been prescribed
Intended for single-patient re-use in the home environment and multipatient re-use in the hospital/institutional environment
The mask must be used under qualified supervision for users who are unable to remove the mask by themselves. The mask may not be suitable for those predisposed to aspiration
The elbow and valve assembly have specific safety functions. The mask should not be worn if the valve is damaged as it will not be able to perform its safety function. The valve should be replaced if it is damaged, distorted or torn
The vent holes must be kept clear
This mask should only be used with CPAP or bilevel devices recommended by a physician or respiratory therapist
The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air
Follow all precautions when using supplemental oxygen. Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does not accumulate within the device enclosure and create a risk of fire
Oxygen supports combustion. Oxygen must not be used while smoking or in the presence of an open flame. Only use oxygen in well ventilated rooms.
Remove all packaging before using the mask
Ensure the soft sleeves are fitted at all times during use