The Sur-Fit Natura two-piece ostomy system is ConvaTec's most extensive two-piece product line. The Sur-Fit Natura flange system signals a secure, accurate closure with a series of audible "clicks". A simple snap-off, snap on design allows users to change the pouch quickly to match activities without removing the skin barrier from the skin. Durahesive skin barriers are designed for people whose stoma output is mostly liquid. Unlike other skin barriers that can break down around liquid output, Durahesive skin barriers swell up to protect the stoma. This special effect, called turtle necking, helps create a more secure seal without harming the skin. Durahesive skin barriers are also easy to fit, apply, and remove. They will adhere securely to the skin while showering, bathing, and swimming.

• Tape collar
• Flexible
• Durahesive skin barrier provides added protection from liquid output. Durahesive skin barrier will turtleneck or gently swell up and hug the stoma, better protecting the skin around your stoma
• Coupling ring provides audible click confirming secure connection to pouch
• skin barriers are available with white or tan fabric collar for increased flexibility. Without a fabric collar and pre-cut or cut-to-fit
• Lifestyles: Colostomy, ileostomy, urostomy, daywear, nightwear, extended travel, maximum protection, hospital, sensitivity, bathing, extended wear, travel, active, sensitive skin, swimming
• 5 in. x 5 in. Overall dimension
• Tostado

Este artículo es elegible para FSA (cuenta de gastos flexible).

Preparation of skin barrier/wafer: 1. Measure your stoma using the measuring guide provided. Select a skin barrier with a flange (white ring) at least 0.5 in. larger than your stoma size. For flush or retracted stomas, convex skin barriers are recommended. 2. Trace the exact same stoma size onto the center white release paper on the back of the skin barrier. 3. Cut along the tracing with a curved scissor. If using a pre-cut wafer, no cutting necessary. ConvaTec skin barriers are available in Stomahesive and Durahesive, solid and flexible with or without convexity. 4. A caulking material such as Stomahesive paste or an Eakin cohesive seal, can be applied to the back of the skin barrier to further fill gaps between the wafer and the stoma. Allow the paste to set for one minute prior to application to the skin (do not spread the paste.) Application of skin barrier/wafer: 5. Center the skin barrier over the stoma. Press the skin barrier against the skin if using a tape bordered skin barrier, remove the remaining backing paper one side at a time. 6. During application, maintain gentle pressure on the skin barrier for 30 seconds to improve adhesion. Removal of skin barrier/wafer gently pull the skin barrier down, away from the skin, while supporting the adjacent skin with your other hand. To assist with the barrier removal, an AllKare adhesive remover wipe may be used to remove any adhesive buildup.