Sur-Fit Natura 2-PC Pre-Cut Stomahesive Skin Barrier W/Tape Collar 57mm FLG, 10CT

The Sur-Fit Natura ostomy system is a comprehensive product line with our latest skin barrier technologies. The plastic coupling ring allows the pouch and skin barrier to snap together for audible security. Stomahesive skin barriers are ideal for people whose stoma output is semi-formed to formed. This reliable skin barrier provides a unique formula that enables the skin barrier to adhere to both dry and moist skin, it is gentle on skin yet holds firmly. Elegible para FSA
Tape collar
Lifestyles: Colostomy, ileostomy, urostomy, daywear, nightwear, hospital, sensitivity, bathing, travel, active, sensitive skin, swimming
Tostado
Stomahesive skin barriers are recommended stoma output is semi-formed to formed. It holds securely to skin while helping to protect against irritating output
Coupling ring provides audible click confirming secure connection to skin barrier
Skin barriers are available either white or tan fabric collar for increased flexibility. Also available without a fabric collar and pre-cut or cut to-fit
4 in. x 4 in. Overall dimension

Hydrocolloids, Polymeric Matrix

See directions below. Preparation of skin barrier/wafer
Measure your stoma using the measuring guide provided. Select a skin barrier with a flange (white ring) at least 0.5 in. Larger than your stoma size. For flush or retracted stomas, convex skin barriers are recommended
Trace the exact same stoma size onto the center white release paper on the back of the skin barrier
Cut along the tracing With a curved scissor. If using a pre-cut wafer, no cutting is necessary. ConvaTec skin barriers are available in Stomahesive and Durahesive, solid and flexible with or without convexity
A caulking material, such as Stomahesive paste or an Eakin cohesive seal, can be applied to the back of the skin barrier to further fill gaps between the wafer and the stoma
Allow the paste to set for one minute prior to application to the skin (do not spread the paste.)
Center the skin barrier over the stoma. Press the skin barrier against the skin if using a tape bordered skin barrier, remove the remaining backing paper one side at a time
During application, maintain gentle pressure on the skin barrier for 30 seconds to improve adhesion
Removal of skin barrier/wafer gently pull the skin barrier down, away from the skin, while supporting the adjacent skin with your other hand
To assist with the barrier removal, an AllKare adhesive remover wipe may be used to remove any adhesive buildup

Please follow as instructed on the product label.