Ver todas las categorías

Sur-Fit Natura Low Pressure Adaptor Transparent 10CT

0.0
(0)

Cómo conseguirlo

RecogerNo disponible
EnvíoNo disponible
Tamaño:
Agotado en línea
Sur-Fit Natura Low Pressure Adaptor Transparent 10CT
10 u., 0.38 lb. N.° de artículo 541684

The Sur-Fit Natura Low-pressure adaptor converts any Sur-Fit Natura ostomy system into a low-pressure solution post-surgery. The product inserts between the Sur-Fit Natura pouch and skin barrier to create enough clearance for fingers to snap the pouch coupling ring into place without applying force directly to the patient's abdomen, which may cause pain or trauma to the post-op area.

  • Transparente
  • Can be used with Visi-Flow irrigation sleeve on 45, 57, 70mm size
  • Discontinue use when belly tenderness subsided post surgery
  • Primarily used as a post-op tenderness product
  • Fits with Sur-fit Natura skin barrier or pouch with a 45, 57, 70 or 100mm flange size
  • Disposable, one time use. To be changed with each skin barrier change
  • Attaches in between skin barrier and pouch to provide extra finger space that enables clinician, caregiver or patient to attach pouch with low pressure
  • Lifestyles: Colostomy, ileostomy, urostomy, hospital, sensitivity, sensitive skin

Este artículo es elegible para FSA (cuenta de gastos flexible).

Indicaciones

Applying the system: 1. Measure the stoma and select the products: Measure the stoma with a stoma measuring guide. Select the proper size ConvaTec moldable technology skin barrier, Natura low-pressure adapter and Natura drainable pouch. Coupling ring sizes should all be the same. 2. Apply the Natura low-pressure adapter to the skin barrier: Note: when removing the skin barrier from the package, do not remove the clear release liner on the circular adhesive or the white release paper from the flexible fabric collar. Attach the Natura low-pressure adapter to the ConvaTec moldable technology skin barrier by aligning the coupling ring flange on the adapter. Press the two coupling rings together, beginning at the bottom. Follow the edge of the rings together. Several clicks may be heard. Note: To avoid confusion upon removal of the pouch from the Natura low pressure adapter down at the 6 O' clock position. Prepare and customize the skin barrier; place your thumbs or fingers at the center of the starter hole and begin to roll back the adhesive to form an opening that fits the size and shape of the stoma. The adhesive should roll back easily. It is important to not stretch the adhesive. As you shape and roll back easily. It is important to not stretch the adhesive. As you shape and roll back the adhesive, periodically place the ConvaTec moldable technology skin barrier over the stoma, so it can be viewed through the clear release liner window. Once the skin barrier is accurately molded to the shape and size of the stoma, proceed to the next step. Note: The use of scissors with a moldable is not recommended. 4. Remove the clear release liner from the ConvaTec moldable technology skin barrier. Immediately apply the skin barrier, centering the opening over the stoma. Press the skin barrier into place. The rolled adhesive should be adjusted to the stoma to create a snug fit between the adhesive and the storms. Press down on the rolled adhesive along the entire outside of the stoma to ensure a good seal. Then, hold the adhesive in place for at least 30 seconds to secure the skin barrier to the skin remove the white paper from the back of the hydrocolloid fabric collar and press it against the skin, smoothing out any wrinkles. 5. Note: To begin, allow a small amount of air into the pouch by gently expanding it. Align the flange coupling ring on the Natura pouch with the flange coupling ring on the nature low pressure adaptor. press the two rings together, beginning at the bottom and circling around to the top. Several clicks may be heard. Gently tug on the pouch from the low-pressure adaptor, use the pinch and pull technique. Pinch the rim of the low-pressure adaptor with one hand and pull on the other hand to separate them. Note: Do not remove the nature low-pressure adapter from the skin barrier when removing the pouch. 6. Roll or fold up the tail closure four times and press the interlocking closures together. You may hear a soft click when you lock them into place. Wrap the security flat over the folded tail and press down to secure.

*Las reseñas y calificaciones de los clientes reflejan únicamente la opinión y punto de vista de los contribuyentes individuales y no son creadas ni avaldas por CVS Pharmacy. Revise las etiquetas del producto y consulte a su médico si tiene alguna pregunta médica o de salud.

Sur-Fit Natura Low Pressure Adaptor Transparent 10CT

0.0
(0)
Agotado en línea