ResMed Quattro FX Frame System (without headgear), Medium

The ResMed Quattro FX Frame System (without headgear) is a full face mask frame that provides a minimal contact design for a comfortable feel. The suspension-like frame provides a clear line of sight and minimizes red marks on the forehead. The frame is available in medium size, which makes it suitable for most users. The dual-wall spring air cushion provides an enhanced, stable seal, while the adjustable headgear ensures a secure fit
The Quattro FX Full Face CPAP Mask has a built-in quick release that allows CPAP users to get up during the night without having to remove their mask
The ResMed Quattro FX Frame System is compatible with most CPAP machines and is easy to assemble and disassemble for cleaning
Prescription required for complete mask system

See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.

See directions below. Daily/After each use: Disassemble the mask components according to the disassembly instructions
Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap
To optimize the mask seal, facial oils should be removed from the cushion after use
Use a soft bristle brush to clean the vent
Inspect each component and if required, repeat washing until visually clean
Rinse all components well with drinking quality water and allow to air dry out of direct sunlight
When all components are dry, reassemble according to the reassembly instructions
Weekly:
Handwash the headgear

See below warnings. To be used by adult patients ( 66 lb/30 kg) for whom positive airway pressure has been prescribed
Intended for single-patient re-use in the home environment and multipatient re-use in the hospital/institutional environment
The mask must be used under qualified supervision for users who are unable to remove the mask by themselves. The mask may not be suitable for those predisposed to aspiration
The elbow and valve assembly have specific safety functions. The mask should not be worn if the valve is damaged as it will not be able to perform its safety function. The valve should be replaced if it is damaged, distorted or torn
The vent holes must be kept clea.
This mask should only be used with CPAP or bilevel devices recommended by a physician or respiratory therapist
The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air
CPAP and bilevel devices are intended to be used with special masks (or connectors) which have vent holes to allow continuous flow of air out of the mask.
When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask vent holes
However, when the device is not operating, insufficient fresh air will be provided through the mask, and the exhaled air may be rebreathed
Rebreathing of exhaled air for longer than several minutes can, in some circumstances, lead to suffocation. This applies to most models of CPAP or bilevel devices
Follow all precautions when using supplemental oxygen. Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does not accumulate within the device enclosure and create a risk of fire
Oxygen supports combustion. Oxygen must not be used while smoking or in the presence of an open flame. Only use oxygen in well ventilated rooms
Remove all packaging before using the mask
Ensure the soft sleeves are fitted at all times during use