Caliber - Súper minipegamento en gel

Caliber Mini Super Glue Gel bonds instantly. It is great on: metal; rubber; plastics; ceramics and glass. Caliber Super Glue Gel is a cyanoacrylate adhesive that bonds most nonporous surfaces. It is quick, convenient and strong. Usage Information: Excessive adhesive prevents bonding. It will not bond polyethylene or polypropylene and the application temperature ranges from 40 degrees F to 100 degrees F. Not recommended where wet or presence of high humidity
Quick, convenient and strong
Bonds metal, rubber, plastics, ceramics and glass
This item cannot be shipped to the following locations: AA, AE, AK, AP, GU, PR and VI 

Surfaces to be joined must be clean, smooth and dry. Remove nozzle/cap and ring. Replace nozzle back onto tube, nozzle automatically pierces tube. (Point away from eyes). Do not squeeze tube while it is being pierced. Squeeze up from the bottom of the tube. Apply sparingly to one surface only. Press surfaces together as quickly and tightly as possible. Allow several seconds to grip and several minutes to set. Replace cap. Store in cool dry place.

Bonds skin and eyes instantly. Eye and skin irritant. Eye irritant. Danger: Contains cyanoacrylate - Bonds skin and eyes in seconds. Skin contact through clothing may cause burns. May cause allergic skin reaction. Vapors irritating to eyes, nose and throat. Precautions For Use: Avoid contact with skin and eyes. Keep away from children. Eye Contact - Do not force eye lids open. Wash with warm water and apply a gauze patch. Seek medical attention. Skin Contact: Soak in warm soapy water and avoid use of excessive force to free bonded area. Gently pry fingers apart with the aid of a blunt instrument such as a spoon handle, paper clip or pencil peeling or rolling the surfaces apart. Call a physician if irritation occurs or persists. Inhalation: If symptoms occur, remove person to fresh air. Exposure can be limited by use of adequate ventilation. Ingestion: Adhesive will solidify and adhere to the mouth. Saliva will lift the adhesive within 1/2 to 2 days.